Cleary Center Multimedia Technology

Operational Instructions

System can be controlled from the black, wireless AMX panel or from the AMX panel in the equipment rack located in the kitchen.

1.) Touch panel to wake it up. Opening screen with Cleary Center image will appear. Touch “Press Here To Start.”

2.) Choose the audio configuration description that is closest to your need. IMPORTANT: Use the “DVD 5.1 Digital Only” preset if you are showing a DVD. For any other video souce use preset two, “VCR/TV/COMPUTER.” Failure to follow this instruction may cause audio problems.

3.) At the third screen you will see button icons across the top. Choose the signal source that you need:

PC = Personal Computer (VGA signal from the wall box in the northwest corner of the Great Hall)

CD = Audio CD player located in the kitchen rack

CASS = Audio cassette player located in the kitchen rack

VCR = Mini-DV/VHS video tape/cable TV player located in the kitchen rack

DVD = Player located in the kitchen equipment rack

RADIO = AM/FM radio receiver with station presets and scan feature

AUX = The S-Video connector on the wall box in the northwest corner of the Great Hall

PROJ OFF = Turns off video projector only, audio remains

4.) Please note the audio controls on each screen. There are three distinct controls:

MIC = Raise (+) and lower (-) audio level of the microphone(s)

IMPORTANT—microphone may not work until you touch the “+” icon

OTHER = Raise (+) and lower (-) audio level of the selected audio source (i.e. PC, CD, CASS, VCR, DVD, RADIO or AUX)

MUTE = Mutes both mic and source audio – touch the icon again to unmute

5.) To power off system touch the “Exit” button in the lower left corner of the screen

IMPORTANT—answer the question “Yes” if you wish to power down or “No” if you touched the button in error

NOTES:

--The wireless panel has a screen saver to preserve battery life. If the screen goes black simply touch it to bring it back to life.

--Audio can be heard in the hallway, Gathering Space, front reception desk and outside patio if you require it. Simply push the upper button on the wall control located near each area.

--Each wireless microphone has a number label. This number refers to the input control on the microphone mixer in the kitchen eqipment rack.

--The wireless microphones are powered by two AA batteries. There is a pushbutton power switch on the buttom of the handheld mics and on the body pack of the lavalier microphones.

--Each of the three microphone jacks in the Great Hall are active.

--If you don’t have any microphone level, make sure you touch the “+” on the microphone level control. This will restore the microphone audio.

For technical assistance call 785-8058. When you hear a second dial tone push “25” on the touchtone pad. Your call will be answered by a technician.